Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!news.rmit.EDU.AU!news.unimelb.EDU.AU!munnari.OZ.AU!spool.mu.edu!howland.reston.ans.net!swrinde!newsfeed.internetmci.com!in2.uu.net!news.orgland.ru!news.orgland.ru!not-for-mail
From: dnb@orgland.ru (Dmitri Beloslioudtsev)
Newsgroups: comp.unix.bsd.freebsd.misc
Subject: 2.2-960501-SNAP and Digital DC21041 Ethernet - some errors.
Date: 12 Jun 1996 05:07:52 +0400
Organization: Orgland Ltd. Zelenograd
Lines: 136
Distribution: world
Message-ID: <4pl598$9c6@orgland.ru>
NNTP-Posting-Host: orgland.ru
X-Newsreader: TIN [UNIX 1.3 950823BETA PL0+color]
Hello!
I have a problem using Digital DC21041 Ethernet PCI card with 2.2-960501-SNAP.
Seems to me that the driver can't correctly determine the type of ethernet
media (I have BNC). But if I boot linux or boot DOS and run card's diagnostic
program, then after reboot FreeBSD works correctly and flawlessly.
Like linux or diagnostic program "cure" the card and after that FreeBSD
works OK.
If I try to boot FreeBSD immediately after power on, it hangs almost at
end of kernel boot process immediately before running init.
If I change the cards in the slots I was able to boot FreeBSD, but in that
case the network card is not working and commands like 'arp -a' hangs (but can
be terminated).
My config:
FreeBSD 2.2-960501-SNAP #2: Tue Jun 11 00:45:22 MSD 1996
root@xxxx.orgland.ru:/usr/src/sys/compile/XXXX
Calibrating clock(s) relative to mc146818A clock ... i586 clock: 119751400 Hz, i8254 clock: 1193177 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_I586_CALIBRATION not specified - using old calibration method
i586 clock: 0 Hz
CPU: Pentium (119.75-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 16777216 (16384K bytes)
avail memory = 14741504 (14396K bytes)
BIOS Geometries:
0:0107fe3f 0..263=264 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x8000005c
pcibus_setup(1a): mode1res=0x80000000 (0x80000000)
pcibus_check: device 0 is there (id=122d8086)
Probing for devices on PCI bus 0:
configuration mode 1 allows 32 devices.
chip0 <Intel 82437 (Triton) PCI cache memory controller> rev 2 on pci0:0
CPU Inactivity timer: clocks
Peer Concurrency: enabled
CPU-to-PCI Write Bursting: enabled
PCI Streaming: enabled
Bus Concurrency: enabled
Cache: 256K pipelined-burst secondary; L1 enabled
DRAM: no memory hole, 60 MHz refresh
Read burst timing: x-2-2-2/x-3-3-3
Write burst timing: x-3-3-3
RAS-CAS delay: 3 clocks
chip1 <Intel 82371 (Triton) PCI-ISA bridge> rev 2 on pci0:7:0
Extended BIOS: enabled
Lower BIOS: disabled
Coprocessor IRQ13: enabled
Mouse IRQ12: disabled
Interrupt Routing: A: IRQ11, B: IRQ10, C: IRQ9, D: disabled
MB0: disabled, MB1: disabled
pci0:7:1: Intel Corporation, device=0x1230, class=storage (ide) [no driver assigned]
map(20): io(3000)
de0 <Digital DC21041 Ethernet> rev 17 int a irq 11 on pci0:17
mapreg[10] type=1 addr=00006000 size=0080.
mapreg[14] type=0 addr=f0801000 size=0080.
reg16: ioaddr=0x6000 size=0x80
de0: DC21041 [10Mb/s] pass 1.1 Ethernet address 00:80:48:e8:71:c4
bpf: de0 attached
ahc0 <Adaptec aic7850 SCSI host adapter> rev 0 int a irq 10 on pci0:18
mapreg[10] type=1 addr=00006100 size=0100.
mapreg[14] type=0 addr=f0800000 size=1000.
ahc0: BurstLen = 8DWDs, Latency Timer = 32PCLKS
ahc0: aic7850 Single Channel, SCSI Id=7, 3 SCBs
ahc0: Host Adapter Bios disabled. Using default SCSI device parameters
ahc0: Downloading Sequencer Program...Done
ahc0: Probing channel A
ahc0 waiting for scsi devices to settle
ahc0: target 0 synchronous at 10.0MHz, offset = 0xf
(ahc0:0:0): "FUJITSU M2932S-512 0110" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 2076MB (4253391 512 byte sectors)
sd0(ahc0:0:0): with 3421 cyls, 9 heads, and an average 138 sectors/track
ahc0: target 3 synchronous at 4.4MHz, offset = 0x8
(ahc0:3:0): "PIONEER CD-ROM DR-124X 1.05" type 5 removable SCSI 2
cd0(ahc0:3:0): CD-ROM cd present [1301008 x 512 byte records]
vga0 <VGA-compatible display device> rev 0 int a irq 9 on pci0:19
mapreg[10] type=0 addr=f0000000 size=800000.
pci0: uses 8392832 bytes of memory from f0000000 upto f080107f.
pci0: uses 384 bytes of I/O space from 6000 upto 61ff.
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x280-0x287 irq 5 flags 0x5 on isa
sio0: type 16550A (multiport master)
sio1 at 0x288-0x28f flags 0x5 on isa
sio1: type 16550A (multiport)
sio2 at 0x290-0x297 flags 0x5 on isa
sio2: type 16550A (multiport)
sio3 at 0x298-0x29f flags 0x5 on isa
sio3: type 16550A (multiport)
sio4 at 0x2a0-0x2a7 flags 0x5 on isa
sio4: type 16550A (multiport)
sio5 at 0x2a8-0x2af flags 0x5 on isa
sio5: type 16550A (multiport)
sio6 at 0x2b0-0x2b7 flags 0x5 on isa
sio6: type 16550A (multiport)
sio7 at 0x2b8-0x2bf flags 0x5 on isa
sio7: type 16550A (multiport)
sio8 at 0x3f8-0x3ff irq 4 on isa
sio8: type 16550A
sio9 at 0x2f8-0x2ff irq 3 on isa
sio9: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
bpf: lp0 attached
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
imasks: bio c0000440, tty c00308ba, net c00308ba
bpf: tun0 attached
new masks: bio c0000440, tty c00308ba, net c00308ba
bpf: sl0 attached
bpf: sl1 attached
bpf: sl2 attached
bpf: sl3 attached
bpf: sl4 attached
bpf: sl5 attached
bpf: ppp0 attached
bpf: ppp1 attached
bpf: ppp2 attached
bpf: ppp3 attached
bpf: ppp4 attached
bpf: ppp5 attached
bpf: lo0 attached
bpf: ds0 attached
sd0s1: type 0xa5, start 63, end = 4241159, size 4241097 : OK
de0: enabling Thinwire/BNC port
With best regards,
--
Dmitri Beloslioudtsev, Firm "Orgland", Zelenograd, Russia
mailto:dnb@orgland.zgrad.ru http://orgland.ru/~dnb