Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!news.rmit.EDU.AU!news.unimelb.EDU.AU!munnari.OZ.AU!news.mel.connect.com.au!news.mira.net.au!inquo!news.seinf.abb.se!nooft.abb.no!Norway.EU.net!nntp.uio.no!news.cais.net!newsfeed.internetmci.com!in2.uu.net!news.gtn.com!klemm.gtn.com!usenet From: andreas@klemm.gtn.com (Andreas Klemm) Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: MGA Millenium Video Card Date: 12 Jun 1996 21:50:18 GMT Lines: 25 Message-ID: <4pne2q$ec@klemm.gtn.com> References: <31BF0B26.59E2B600@george.lbl.gov> NNTP-Posting-Host: klemm.gtn.com X-Newsreader: knews 0.9.6 In-Reply-To: <31BF0B26.59E2B600@george.lbl.gov> To: Sonia Sachs <ssachs@george.lbl.gov> In article <31BF0B26.59E2B600@george.lbl.gov>, Sonia Sachs <ssachs@george.lbl.gov> writes: >I need help configuring our Matrox MGA Millenium video card. I looked into the >supported list of video cards by FreeBSD and this card is listed there as >supported. However, as I configure my display, MGA Millenium is not an >option on the menu. I chose SVGA, and it didn't work. I get two error messages: >SVGA: too little memory for virtual resolution 1600 1200 and >A configured device found, but display modes cannot be resolved. Isn't it enough to post it once instead of posting it multiple times ?! As far as I know the Matrox Millenium isn't supported by XFree86. Only by the Xinside Accelerated Server. SVGA possibly won't work with the card, that has a special graphic chip. Although most chips are SVGA compatible. But I think then only in SVGA standard resolutions. -- andreas@klemm.gtn.com /\/\___ Wiechers & Partner Datentechnik GmbH Andreas Klemm ___/\/\/ Support Unix -- andreas.klemm@wup.de pgp p-key http://www-swiss.ai.mit.edu/~bal/pks-toplev.html >>> powered by <<< ftp://sunsite.unc.edu/pub/Linux/system/Printing/aps-491.tgz >>> FreeBSD <<<