Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!news.rmit.EDU.AU!news.unimelb.EDU.AU!munnari.OZ.AU!news.mel.connect.com.au!news.mira.net.au!inquo!news.uoregon.edu!hunter.premier.net!news.mathworks.com!nntp.primenet.com!winternet.com!news From: srose@winternet.com (Steve Rose) Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: ATAPI CD problems Date: Wed, 19 Jun 1996 20:16:14 GMT Organization: unorganized Lines: 28 Message-ID: <31c85f89.1411820@news.winternet.com> References: <31C83F60.41C67EA6@microware.com> NNTP-Posting-Host: 206.145.129.4 X-Newsreader: Forte Agent .99e/32.227 Richard Flinn <richardf@microware.com> wrote: >Is it possible to use my ATAPI cdrom configures as the master on the >second controller? I installed a minimal system from a DOS partition and >then re-compiled a kernel with wcd0 support, but it doesnt detect on >startup (although wdc1 is detected). >Thanks in advance. >-- This is an excerpt from my kernel config, which is working fine for 2 ATAPI CD's on the primary and secondary controllers. (I have SCSI hard disks) controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr #disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr #disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 # enabled support for ATAPI CD-ROM's on controller 0 and 1 options ATAPI #Enable ATAPI support for IDE bus device wcd0 #IDE CD-ROM device wcd1 #IDE CD-ROM //===================================================// Steve Rose Mounds View, MN srose@winternet.com