Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!news.ecn.uoknor.edu!news.wildstar.net!news.sdsmt.edu!news.mid.net!newsfeeder.gi.net!newsfeed.internetmci.com!news.sesqui.net!rice!usenet
From: John Paul Campbell <jpc@rice.edu>
Newsgroups: comp.unix.bsd.freebsd.misc
Subject: HELP AGAIN! Startx causes reboot!
Date: Mon, 01 Jul 1996 20:28:14 -0500
Organization: Rice University, Houston, Texas
Lines: 67
Message-ID: <31D87B2E.3B2EAE20@rice.edu>
References: <4r8j6u$pdk@zgs.com>
NNTP-Posting-Host: pasyn-45.rice.edu
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Mailer: Mozilla 3.0b4Gold (X11; I; Linux 1.2.8 i586)
I posted earlier how when I typed startx, my system rebooted. It was
requested that I post the stderr of startx so here it is. Note the
section where it can't find the RGB_DB dbase. I hope this helps.
Here it is:
XFree86 Version 3.1.2 / X Window System
(protocol Version 11, revision 0, vendor release 6000)
Operating System: FreeBSD 2.0.5
Configured drivers:
SVGA: server for 8-bit colour SVGA (Patchlevel 0):
et4000, et4000w32, et4000w32i, et4000w32p, et3000, pvga1, wd90c00,
wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, vgawonder,
tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga9000, clgd5420,
clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430,
clgd5434,
clgd5436, clgd6205, clgd6215, clgd6225, clgd6235, ncr77c22,
ncr77c22e,
cpq_avga, oti067, oti077, oti087, mx, al2101, ali2228, ali2301,
ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7,
ct65520, ct65530, ct65540, ct65545, ark1000vl, ark1000pv,
ark2000pv,
realtek, generic
Using syscons driver with X support (version 2.0)
(using VT number 4)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) Mouse: type: PS/2, device: /dev/mouse, baudrate: 1200,
3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "Video Card"
(**) SVGA: Monitor ID: "Monitor"
(--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
Couldn't open RGB_DB '/usr/X11R6/lib/X11/rgb'
(--) SVGA: chipset: clgd5434
(--) SVGA: videoram: 1024k
(--) SVGA: clocks: 25.23 28.32 41.16 36.08 31.50 39.99 45.08
49.87
(--) SVGA: clocks: 64.98 72.16 75.00 80.01 85.23 90.00 95.02
100.23
(--) SVGA: clocks: 108.03 109.77
(--) SVGA: Maximum allowed dot-clock: 110.636 MHz
(**) SVGA: Mode "640x480": mode clock = 31.500, clock used = 31.499
(**) SVGA: Mode "800x600": mode clock = 40.000, clock used = 39.991
(**) SVGA: Mode "1024x768": mode clock = 75.000, clock used = 74.999
(**) SVGA: Virtual resolution set to 1152x900
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: clgd5434: Internal memory clock register is 0x1c (Standard
RAS)
(--) SVGA: clgd5434: CL-GD5434 rev. E+, will program 0x22 MCLK
(**) SVGA: clgd5434: Internal memory clock register set to 0x22
(**) SVGA: clgd5434: Approximate DRAM bandwidth for drawing: 90 of 121
MB/s
(--) SVGA: clgd5434: 11776 bytes off-screen memory available
(--) SVGA: clgd5434: Using hardware cursor
(--) SVGA: clgd5434: Using accelerator functions
(--) SVGA: clgd5434: Using BitBLT engine
thanks,
desparate jpc