Return to BSD News archive
Newsgroups: comp.unix.bsd.freebsd.misc
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!news.ecn.uoknor.edu!news.cis.okstate.edu!newsfeed.ksu.ksu.edu!news.mid.net!newsfeeder.gi.net!newsfeed.internetmci.com!news.mathworks.com!uunet!in1.uu.net!wolf.riga.lv!racoon.riga.lv!stoat!fairpay
From: fairpay@stoat.riga.lv (Fair pay)
Subject: Problem with 3rd SCSI-2 HDD
Message-ID: <Du8MHt.CFB@racoon.riga.lv>
Sender: usenet@racoon.riga.lv (Usenet News Owner)
Organization: LvNet-Teleport, Riga, Latvia
X-Newsreader: TIN [version 1.2 PL2]
Date: Mon, 8 Jul 1996 18:39:29 GMT
Lines: 35
Hello,
there is a big problem (at least for me) with SCSI HDDs.
There is a PC with Adaptec AIC-7850 on motherboard and FreeBSD 2.1.0.
There are three HDDs attached to the SCSI-2 bus:
ID
----------------------------
0 Conner CFP1080S (SCSI terminated)
1 Quantum Lightning 540S (SCSI not terminated)
2 Conner CFP2105S (SCSI not terminated)
7 AIC-7850 (SCSI terminated)
When FreeBSD 2.1 is booted (I booted by means of install.bat/inst_ide.bat
under DOS), it detects ahc0, waits "SCSI deviced to settle", then shows
list of disks' data, and then about 10-15 copies of the string
"ahc0 WARNING no command for scb 0"
and goes to reboot.
When the HDD with ID 2 is detached from the bus (by removing cabling),
FreeBSD boots ok. Besides this I tried to insert/remove terminators
on the HDD, but the problem persists.
The HDD with ID 2 was installed yesterday and there ar 3 partitions
on it, first one is used by OS/2, on second one NT is installed. The
HDD workes fine under those OS. So the hardware configuration seems
to be proper.
Could you please provide any possible solutions for the problem ?
Thanks in advance. Dima.
--
Dmitry Solodov
E-mail: dima@irs.riga.lv | fax. +371-7287659