Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.anu.edu.au!harbinger.cc.monash.edu.au!nntp.coast.net!news.kei.com!newsfeed.internetmci.com!uwm.edu!miller.cs.uwm.edu!scottk From: scottk@miller.cs.uwm.edu (Scott Knaffla) Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: Buslogic SCSI install fails Date: 21 Jul 1996 14:47:49 GMT Organization: University of Wisconsin - Milwaukee - CS Lines: 18 Message-ID: <4stful$sun@uwm.edu> References: <4sm3uk$cvp@uwm.edu> <4sngvl$35r@uriah.heep.sax.de> NNTP-Posting-Host: 129.89.9.13 In comp.unix.bsd.freebsd.misc article <4sngvl$35r@uriah.heep.sax.de>, joerg_wunsch@uriah.heep.sax.de (Joerg Wunsch) wrote: >scottk@miller.cs.uwm.edu (Scott Knaffla) wrote: >> When I put the floppy for 2.1.5 (I have used the same floppy to >> install 2 other machines so I think it should be fine), the system >> comes up, probe finds my SCSI card says it's reading the board >> settings and prints out that it's at 0x330-x333 dma 5 irq 11 [...] >. Turn off ISA DMA emulation, you don't need it, and i remember that it > did bad things with the Bt742A i've been using for years, and >. make interrupts level-triggered. I tried them both, now probe says that bt0 is busmastering, and the alternate console shows that it found my cdrom and tape drive, but it still doesn't see the disk so I can't install :-( Any more suggestions? - Scott