*BSD News Article 76026


Return to BSD News archive

Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!nntp.coast.net!news.dacom.co.kr!news.kreonet.re.kr!usenet.etri.re.kr!usenet.kornet.nm.kr!agate!howland.erols.net!newsxfer2.itd.umich.edu!portc01.blue.aol.com!news-res.gsl.net!news.gsl.net!usenet.eel.ufl.edu!warwick!yama.mcc.ac.uk!viking.ucsalf.ac.uk!not-for-mail
From: mark@plato.ucsalf.ac.uk (Mark Powell)
Newsgroups: comp.unix.bsd.freebsd.misc,list.freebsd.hackers
Subject: Linux async vs. FreeBSD sync
Date: 8 Aug 1996 09:27:11 +0100
Organization: Computer Services Unit, University College Salford, Salford, Manchester, UK
Lines: 29
Message-ID: <4uc8cv$3ua@plato.ucsalf.ac.uk>
NNTP-Posting-Host: plato.ucsalf.ac.uk

A lot has been said about this recently. However, I've used both systems
alot and had only ever noticed Linux's "feel of speed" as far as the
filesystem is concerned. I recently installed Linux on an Adaptec 7880 
chipset based motherboard. Apart from having to go around the houses to
even install Linux on such a system (I eventually used redhat with the
*unsupported* 1.3.57 kernel) I really discovered the benefits of the sync
system. I've been running FreeBSD for around 9 months on a 7880 based 
chipset and got regular SCSI hangs when the bus was put under load (this
is fixed since around June 8th.) However, I never noticed *any* loss of
data from any of these crashes. With the linux system I experienced the 
same scsi bus hangs during rebuilds of the newer Linux kernel 2.0.11. 
Nearly every single time the linux box hung I completely lost the filesystem.
One the occasions that fsck would even fix the damn thing I'd find I'd
lost /etc/passwd, login etc. etc. <arrrgh> I eventually got the new kernel
built by slowing down the build. Now I have the latest scsi code in there
I still mount all the filesystems under Linux synchronous.
  Linux installs are a damn pain. Redhat requires *three* floppy disks for
it's install, whereas I only ever use one for FreeBSD. BTW Any chance of 
BOOTP/DHCP in the install program, that'd be a real treat.
  Anyway, thought I'd just let you know of my positive experience with
FreeBSD. Keep up the good work. I'll save Linux for play and the FreeBSD
for the serious work. (I was only installing Linux to play xquake. Now
someone tells me FreeBSD-2.2 will run it arrrrgh!!)
-- 
Mark Powell - Senior Network Technician - Room: C806
Computer Services Unit, University College Salford, Salford, Manchester, UK.
Tel:	+44 161 745 3376	Fax:	+44 161 736 3596
Email:	mark@ucsalf.ac.uk	finger mark@ucsalf.ac.uk (for PGP key)
<A HREF="http://www.ucsalf.ac.uk/~mark/">Home Page</A>