Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!news.rmit.EDU.AU!lynx.aba.net.au!munnari.OZ.AU!news.mel.connect.com.au!news.mira.net.au!news.vbc.net!garlic.com!news.scruz.net!legba.synergy.net!news.inetnebr.com!newsrelay.courtave.net!news.localnet.com!news.wildstar.net!news.ececs.uc.edu!news.kei.com!newsfeed.internetmci.com!uwm.edu!news.cse.psu.edu!news.cc.swarthmore.edu!netnews.upenn.edu!news.enter.net!usenet
From: dh@enter.net (Daniel Hauer)
Newsgroups: comp.unix.bsd.freebsd.misc
Subject: Re: Help: USR Robotics 28.8k Modem
Date: Sun, 01 Sep 1996 11:22:13 GMT
Organization: ENTER.NET
Lines: 36
Message-ID: <322971c8.77701050@news.enter.net>
References: <508gbg$l98@holodeck.iss.nus.sg>
NNTP-Posting-Host: pm7-20.enter.net
X-Newsreader: Forte Agent .99e/32.227
thgoh@iss.nus.sg (Goh Tiong Hwee) wrote:
>Hi,
>I tried to "upgrade" a dialin line from 14.4k to 28.8k using the USR Robotics
>but am having difficulty.
>Since it worked with 14.4k, I assume the troube is due either to the modem init string
>(modem config) or the serial port speed.
>I have tried combinations of both including using the recommended modem init string
>for the 14.4k USR init string, ie.
>
>AT&C1&D2&H1&I0&R2&W
>
>
>but when I dail in all i get is
>
>atdt6243
>CONNECT 38400
>b-n~}}}}}}~1LBk)}i}~1JBk%yi)}}~"b(-n~i}}}}}}"b(-n~}}}}}}}}~1JBkO}}}}}}}}~"b-n}}}
>}}}}}}~1)!O}}}}}}}y1)!O~}}}}}~1JBkO}}}}}}}}~1NBk)}}}}}9"b(-n~y
>
>
>Any tips would be appreciated.
>
>Rgds
>TH Goh
>
Flow control problem, use AT&F1....
*****************************************************
Dan Hauer
Extended Technical Support
Enter.net - PA's best Internet Ride!
http://www.enter.net
dh@enter.net
*****************************************************