Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!news.mel.connect.com.au!news.mira.net.au!news.vbc.net!garlic.com!news.scruz.net!noos.hooked.net!www.nntp.primenet.com!nntp.primenet.com!howland.erols.net!newsfeed.internetmci.com!news.intersurf.net!thoth.nilenet.com!news.goodnet.com!news From: accent@goodnet.com Newsgroups: comp.unix.bsd.freebsd.misc Subject: Atapi cd-rom Date: Mon, 09 Sep 1996 16:30:18 GMT Organization: GoodNet Lines: 16 Message-ID: <511gj6$1ojk@news.goodnet.com> NNTP-Posting-Host: tempe-ts10-14.goodnet.com X-Newsreader: Forte Free Agent 1.0.82 HELP!!! I have a pentium 133 mhz with 16 meg EDO ram, the motherboard is a Intel 430 hx with onboard pci and ide master bus controller which my teac CD58E cd-rom is hooked up to. I also have a matrox millenium video with 2 meg WRAM and a soundblaster 32 AWE sound card. My hard drive is a 2 GIG SCSI HP C3725S with an Adaptec 2940PCI controller. The problem is that I can not install from the cd-rom. Any help would be appreciated. I can boot with install from the cd-rom or I can boot from a floppy with no problems. I can go through all the menus but when I choose thye install medium as the Teac cd-rom I get No Cd-Rom devices found!!??? I have tried setting the jumper on the CD from master to slave and have even tried using the PCI controller with no effect. During boot both on board controllers are detected depending on which I have the cd hooked up too. So it is recognizing both on board controllers when the cd-rom is hooked up to it but still get the same message "No Cd devices found".