Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!news.mira.net.au!news.mel.connect.com.au!munnari.OZ.AU!news.ecn.uoknor.edu!news.cis.okstate.edu!newsfeed.ksu.ksu.edu!news.mid.net!news.sdsmt.edu!news.wildstar.net!news.ececs.uc.edu!news.kei.com!news.mathworks.com!hunter.premier.net!www.nntp.primenet.com!nntp.primenet.com!news.primenet.com!bill From: bill@primenet.com (William Petrisko) Newsgroups: comp.unix.bsd.bsdi.misc Subject: stb 4-com serial card Date: 15 Sep 1996 16:35:06 -0700 Organization: Primenet Services for the Internet Lines: 13 Message-ID: <51i3ra$gtb@nnrp1.news.primenet.com> X-Posted-By: bill@206.165.5.101 (bill) Has anyone successfully set up a STB 4-COM serial board under bsdi (1.1 or 2.1)? I am setting the i/o addresses and shared interrupt, but am not sure of the "flags" section of the definition in the kernel. Any advice would be appreciated. bill -- ---William J. Petrisko (WP5)----------------------bill@primenet.net--- ---Primenet, Network Engineer-----------------------------------------