Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!news.rmit.EDU.AU!news.unimelb.EDU.AU!munnari.OZ.AU!news.mel.connect.com.au!news.mira.net.au!news.vbc.net!alpha.sky.net!buffnet2.buffnet.net!research-01.ski.mskcc.org!news.sprintlink.net!new-news.sprintlink.net!cs.utexas.edu!math.ohio-state.edu!jussieu.fr!rain.fr!speedy.grolier.fr!news
From: Un L'Unique <Un@grolier.Fr>
Newsgroups: comp.unix.bsd.freebsd.misc
Subject: Adatptec 1515
Date: Thu, 19 Sep 1996 16:40:17 +0000
Organization: Grolier Interactive Europe
Lines: 106
Message-ID: <32417771.41C67EA6@grolier.Fr>
NNTP-Posting-Host: gatekeeper.grolier.fr
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Mailer: Mozilla 3.0 (X11; I; FreeBSD 2.1.5-RELEASE i386)
CC: un@grolier.fr
Hello,
I have installed a 1515 SCSI card in my DELL using FreeBSD
2.1.5 with A 4Go FUJITSU HardDrive.
Using Windows 95, all are ok (except that I put the 1515 on
irq 12 due to irqu conflict with my gfx card).
But under FreeBSD I can't use the disk. The controler are recognised,
the disk too but any access to /dev/sd0 hange the command (and sometime
all disk access forcing my to boot without shutdown.
here some info:
>dmesg
FreeBSD 2.1.5-RELEASE #0: Thu Sep 12 18:58:01 MET DST 1996
un@tsointsoin.studio.grolier.fr:/opt/src/sys/compile/TsoinTsoin
CPU: 100-MHz Pentium 815\\100 (Pentium-class CPU)
Origin = "GenuineIntel" Id = 0x526 Stepping=6
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
Physical memory hole(s):
avail memory = 29990912 (29288K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82437 PCI cache memory controller> rev 2 on pci0:0
chip1 <Intel 82371 PCI-ISA bridge> rev 2 on pci0:7:0
chip2 <Intel 82371 Bus-master IDE controller> rev 2 on pci0:7:1
vga0 <VGA-compatible display device> rev 83 int a irq 11 on pci0:16
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
pca0 on motherboard
pca0: PC speaker audio driver
qcam0 not found at 0x3bc
gp0 not found at 0x2c0
gsc0 not found at 0x270
cy0 not found
dgb0 not found at 0x220
labpc0 not found at 0x260
rc0 not found at 0x220
tw0 not found at 0x380
si0 not found
asc0.probe: failed, got 0xff instead of 0xa5
asc0 not found at 0x3eb
stl0 not found at 0x2a0
stli0 not found at 0x2a0
bt0 not found at 0x330
aha0 not found at 0x330
uha0 not found at 0x330
aic0 at 0x340-0x35f irq 11 on isa
(aic0:4:0): "FUJITSU M2934S-512 0103" type 0 fixed SCSI 2
sd0(aic0:4:0): Direct-Access 4153MB (8506782 512 byte sectors)
sd0(aic0:4:0): with 3421 cyls, 18 heads, and an average 138
sectors/track
nca0 not found at 0x1f88
nca4 not probed due to I/O address conflict with aic0 at 0x350
sea0 not found
wds0 not probed due to I/O address conflict with aic0 at 0x350
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <QUANTUM FIREBALL1080A>
wd0: 1039MB (2128896 sectors), 2112 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <NEC CD-ROM DRIVE:282/3.04>,
removable, dma, iordy
wcd0: 1376Kb/sec, 128Kb cache, audio play, 256 volume levels, ejectable
tray
wcd0: medium type unknown, unlocked
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wt0 not found at 0x300
1 3C5x9 board(s) on ISA found at 0x300
ep0 at 0x300-0x30f irq 10 on isa
ep0: utp[*UTP*] address 00:c0:4f:d5:10:76
npx0 on motherboard
npx0: INT 16 interface
nca1 not found at 0x1f84
nca2 not found at 0x1f8c
nca3 not found at 0x1e88
pas0 not found at 0x388
sb0 at 0x220 irq 7 drq 1 on isa
sb0: <SoundBlaster 16 4.13>
sbxvi0 at 0x0 drq 5 on isa
sbxvo0: <SoundBlaster 16 4.13>
sbmidi0 not found at 0x330
ctx0 not found at 0x230
spigot0 not found at 0xad6
apm0 not probed due to I/O address conflict with sbxvi0 at 0x0
joy0 at 0x201 on isa
joy0: joystick
sctarg0(noadapter::): Processor Target
ccd0-3: Concatenated disk drivers
WARNING: / was not properly dismounted.
>sysinstall
sd0(aic0:4:0): timed out
sd0(aic0:4:0): timed out
sd0(aic0:4:0): timed out
etc.
Any idea ?
Thanks in advance....
S.R.