Return to BSD News archive
Newsgroups: comp.unix.bsd.freebsd.misc
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!news.mira.net.au!news.mel.connect.com.au!news.mel.aone.net.au!imci4!newsfeed.internetmci.com!www.nntp.primenet.com!nntp.primenet.com!news-peer.gsl.net!news.gsl.net!portc01.blue.aol.com!newsstand.cit.cornell.edu!news.acsu.buffalo.edu!news.drenet.dnd.ca!crc-news.doc.ca!nott!bcarh189.bnr.ca!nrchh45.rich.nt.com!ferret.ocunix.on.ca!resurrect
From: gerg@netcom.com (Greg Andrews)
Subject: Re: Can't install on 386 SX 16mhz
Message-ID: <R.gergDy2J0o.5rp@netcom.com>
Organization: WGASA.ORG: Long slow deep soft wet pings that last for three days
References: <324360F5.CA09605@sympatico.ca>
Date: Sat, 21 Sep 1996 05:53:12 GMT
Lines: 27
Sender: gerg@netcom23.netcom.com
Reposting article removed by rogue canceller.
Stephane Lajeunesse <slajeunesse@sympatico.ca> writes:
>Hi folks.
>
>Yeah I know, not the best system but... Anyways, I'm trying to install
>version 2.1 of FreeBSD. I only have four megs of ram (I read somewhere
>that I can install FreeBSD with four megs!!).
>
>Anyways, when FreeBSD boots up, it DOESN'T detect my hard drive.
>
>I have an old Packard Bell Legend 386 SX 16-mhz with an equally old WD
>40 meg HD.
>
>When it gets to WDC0 and WDC1 (controller one and two), it says NOT
>FOUND.
>
I was able to install and run v2.1.0 on my 386sx-16 with an 80 meg
MFM drive. I boosted the memory to 8 megs and it's been running
quite well as the dial-up router between my home network and
the net. I installed from CDROM.
-Greg
--
::::::::::::::::::: Greg Andrews gerg@netcom.com :::::::::::::::::::
Why does man kill? He kills for food. And not only food: frequently
there must be a beverage.
-- Woody Allen, "Without Feathers"
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::