Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!news.mira.net.au!news.vbc.net!knews.uk0.vbc.net!newsfeed.easynet.co.uk!easynet-uk!www.nntp.primenet.com!nntp.primenet.com!cpk-news-hub1.bbnplanet.com!nntp-hub2.barrnet.net!news1.digital.com!data.ramona.vix.com!sonysjc!sonybc!usenet From: Warren Trent <wtrent@bppgmis.bppg.sel.sony.com> Newsgroups: comp.unix.bsd.bsdi.misc Subject: xqa for Spider Date: Wed, 09 Oct 1996 15:05:22 -0400 Organization: Sony Electronics Inc. Lines: 9 Message-ID: <325BF772.167E@bppgmis.bppg.sel.sony.com> NNTP-Posting-Host: bppgmis.bppg.sel.sony.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Mailer: Mozilla 2.02S (X11; I; IRIX 5.3 IP22) Does anyone have an xqa file for a Spider Tarantula MK II with 2M? Or can anyone point me in the right direction? It's an S3 chip (86C968). I'm running AcceleratedX 1.2, so the 968 should be supported, but when I run xinit, I get a cursor with (usually) a black background and no colors whatsoever. I must be close because I can run xearth and see it flash in the background when I kill the Xserver. Also, running Xsetup after xinit with my xqa file causes a core dump. Any ideas? Thanks in advance.