Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!news.ecn.uoknor.edu!news.wildstar.net!news.sdsmt.edu!news.mid.net!news.dra.com!feed1.news.erols.com!howland.erols.net!news.sprintlink.net!news-stk-200.sprintlink.net!news.sprintlink.net!news-pull.sprintlink.net!news.sprintlink.net!news-dc-10.sprintlink.net!news.utelfla.com!opal.xtalwind.net!usenet From: Jack <jack@xtalwind.net> Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: ATAPI CDROM Date: Sat, 12 Oct 1996 20:48:48 -0400 Organization: Crystal Wind Communications Lines: 43 Message-ID: <32603C70.41C67EA6@xtalwind.net> References: <Dz5Cr3.6p5.G.nanguo@nanguo.chalmers.com.au> <325FAB6C.167EB0E7@xtalwind.net> <325FC2A3.7B05@ixl.net> NNTP-Posting-Host: slipper29b.xtalwind.net Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Mailer: Mozilla 3.0b7Gold (X11; I; FreeBSD 2.1.5-RELEASE i386) To: Christopher Davis <hdavis@ixl.net> Christopher Davis wrote: > > Jack wrote: > > > > Robert Chalmers wrote: > > > > > > It seems that the only release that will drive the ATAPI > > > type CD-ROMs is the 2.2 SNAPSHOT releases. I haven't found > > > ANY other release that does. > > > > I've had no problems with two different ATAPI CD-ROMS with either 2.1.0 > > or 2.1.5 > What kind of drives were you using? How were tey hooked into your > system? Master on secondary HD controller or slave on Primary? I > really want to get the cd to install. A Chinon CDS-545 and a Turtle Beach TBS-4002. Both have been used as the slave on the secondary onboard controller of a Tyan Tomcat II. Primary has a Western Digital 540 (booting OS/2 and Lose95, and a ??10meg FAT data partition that all three {OK 2.25} OSs can see) master and a 1 gig WD (OS/2 data partition and 65megs of FreeBSD swap) slave, the secondary has a 1.2 gig WD (FreeBSD /everything) and the CD-ROM. The Chinon also worked as slave on the secondary controller of a Buslogic VLB BT-410, installed and ran 2.1.0 just fine. It wouldn't work with OS/2 and Buslogic tech support said that I had an early version of the card that does not support ATAPI CD-ROMs. Gotta love that FreeBSD.<G> I installed 2.1.5 with the Chinon, and 2.2-SNAP0801 and 2.1.5 with the Turtle Beach on the onboard controller. -- -------------------------------------------------------------------------- Jack O'Neill Finger jacko@onyx.xtalwind.net or jack@xtalwind.net http://www.xtalwind.net/~jacko/pubpgp.html #include <std_disclaimers.h> for my PGP key. PGP Key fingerprint = F6 C4 E6 D4 2F 15 A7 67 FD 09 E9 3C 5F CC EB CD --------------------------------------------------------------------------