Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!news.Hawaii.Edu!news.uoregon.edu!hunter.premier.net!www.nntp.primenet.com!nntp.primenet.com!cpk-news-hub1.bbnplanet.com!newsfeed.internetmci.com!in2.uu.net!nntp.inet.fi!news.funet.fi!nntp.hut.fi!not-for-mail From: kja2@cc.hut.fi (Kari T Jokiranta) Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: Problem with NCR 53c810 PCI SCSI Date: 24 Oct 1996 15:08:44 GMT Organization: Helsinki University of Technology Lines: 229 Distribution: inet Message-ID: <54o0ps$72n@nntp.hut.fi> References: <54g4g0$t45@nntp.hut.fi> NNTP-Posting-Host: lk-hp-30.hut.fi X-Newsreader: TIN [UNIX 1.3 950824BETA PL0] Thanks to Carl Dietz <dietz@max> and Brian Somers <brian@anorak.coverform.lan> for suggesting solution for my problem. However, the problem still exists. I checked the terminations, they are OK. I also checked that the card is firmly in place. What wonders me is that BIOS always finds the disks, as does the dos drivers that came with the PCI card. I also tried Linux 2.0 bootdisk with NCR support several times, and it booted OK every time. I noticed that if I let the disks spin for 10-15 minutes before I boot FreeBSD, the problem disappears. Seems like the NCR driver doesn't like to coldboot my computer? I include here some of the error messages as well as the messages when it boots normally, so someone who's interested can take a look at them.. I booted FreeBSD with option -v, so the listings are long. -- dmesg when fail ---------------------------------------- -- (I wonder where the beginning of the messages has disappeared. -- Is there a limit in /dev/klog?). a 00 00 13 47 00 05 1f 31 00 00 21 80 01 00 02. ncr0: restart (fatal error). (ncr0:5:0): COMMAND FAILED (9 ff) @f0ab394c. ncr0: aborting job ... ncr0:0: ERROR (90:0) (0-21-b8) (0/13) @ (418:43000060). script cmd = 878b0000 reg: da 00 00 13 47 00 05 1f 31 00 00 21 80 01 00 02. ncr0: restart (fatal error). (ncr0:5:0): COMMAND FAILED (9 ff) @f0ab394c. ncr0: aborting job ... ncr0:0: ERROR (90:0) (0-21-b8) (0/13) @ (418:43000060). script cmd = 878b0000 reg: da 00 00 13 47 00 05 1f 31 00 00 21 80 01 00 02. ncr0: restart (fatal error). (ncr0:5:0): COMMAND FAILED (9 ff) @f0ab394c. ncr0: aborting job ... ncr0:0: ERROR (90:0) (0-21-b8) (0/13) @ (418:43000060). script cmd = 878b0000 reg: da 00 00 13 47 00 06 1f 31 00 00 21 80 01 00 02. ncr0: restart (fatal error). (ncr0:6:0): COMMAND FAILED (9 ff) @f0ab394c. ncr0: aborting job ... ncr0:0: ERROR (90:0) (0-21-b8) (0/13) @ (418:43000060). script cmd = 878b0000 reg: da 00 00 13 47 00 06 1f 31 00 00 21 80 01 00 02. ncr0: restart (fatal error). (ncr0:6:0): COMMAND FAILED (9 ff) @f0ab394c. ncr0: aborting job ... ncr0:0: ERROR (90:0) (0-21-b8) (0/13) @ (418:43000060). script cmd = 878b0000 reg: da 00 00 13 47 00 06 1f 31 00 00 21 80 01 00 02. ncr0: restart (fatal error). (ncr0:6:0): COMMAND FAILED (9 ff) @f0ab394c. ncr0: aborting job ... ncr0:0: ERROR (90:0) (0-21-b8) (0/13) @ (418:43000060). script cmd = 878b0000 reg: da 00 00 13 47 00 06 1f 31 00 00 21 80 01 00 02. ncr0: restart (fatal error). (ncr0:6:0): COMMAND FAILED (9 ff) @f0ab394c. ncr0: aborting job ... ncr0:0: ERROR (90:0) (0-21-b8) (0/13) @ (418:43000060). script cmd = 878b0000 reg: da 00 00 13 47 00 06 1f 31 00 00 21 80 01 00 02. ncr0: restart (fatal error). (ncr0:6:0): COMMAND FAILED (9 ff) @f0ab394c. ncr0: aborting job ... ncr0:0: ERROR (90:0) (0-21-b8) (0/13) @ (418:43000060). script cmd = 878b0000 reg: da 00 00 13 47 00 06 1f 31 00 00 21 80 01 00 02. ncr0: restart (fatal error). (ncr0:6:0): COMMAND FAILED (9 ff) @f0ab394c. pci0: uses 256 bytes of memory from fbff0000 upto fbff00ff. pci0: uses 256 bytes of I/O space from e800 upto e8ff. Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 not found at 0x3f8 sio1 not found at 0x2f8 lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 flags 0x1 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in fd1: 1.2MB 5.25in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <QUANTUM LPS270A> wd0: 258MB (528640 sectors), 944 cyls, 14 heads, 40 S/T, 512 B/S wdc0: unit 1 (wd1): <QUANTUM LPS540A> wd1: 516MB (1057280 sectors), 1120 cyls, 16 heads, 59 S/T, 512 B/S wdc1: disabled, not probed. aha0: disabled, not probed. wt0 at 0x338-0x339 irq 9 drq 3 on isa wt0: type <Wangtek> matcd - Matsushita (Panasonic) CD-ROM Driver by FDIV, Version 1(26) 18-Oct-95 matcdc0 at 0x230-0x233 on isa matcdc0 Host interface type 0 matcd0: [CR-5630.80] npx0 on motherboard npx0: INT 16 interface sb0 at 0x220 irq 5 drq 1 on isa sb0: <SoundBlaster 16 4.11> sbxvi0 at 0x0 drq 5 on isa sbxvo0: <SoundBlaster 16 4.11> sbmidi0 at 0x330 on isa <SoundBlaster MPU-401> Device configuration finished. Considering FFS root f/s. Configuring root and swap devs. configure() finished. BIOS Geometries: 0:03ae0d28 0..942=943 cylinders, 0..13=14 heads, 1..40=40 sectors 1:03fe0f3b 0..1022=1023 cylinders, 0..15=16 heads, 1..59=59 sectors 2:03ff063b 0..1023=1024 cylinders, 0..6=7 heads, 1..59=59 sectors 3:02073f20 0..519=520 cylinders, 0..63=64 heads, 1..32=32 sectors 4:03ff0e22 0..1023=1024 cylinders, 0..14=15 heads, 1..34=34 sectors 0 accounted for wd0s1: type 0x6, start 40, end = 471519, size 471480 : OK wd0s2: type 0xa5, start 471520, end = 528639, size 57120 : OK ncr0: restart (ncr dead ?). sd1(ncr0:1:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. sd0(ncr0:0:0): 200ns (5 Mb/sec) offset 7. sd0(ncr0:0:0): UNIT ATTENTION asc:29,0 sd0(ncr0:0:0): Power on, reset, or bus device reset occurred , retries:2 sd0s1: type 0xa5, start 52, end = 422863, size 422812 : OK -- dmesg when success ------------------------------------ FreeBSD 2.1.5-RELEASE #0: Tue Oct 22 01:06:32 EET DST 1996 root@merkkari.inkkari.sini:/usr/src/sys/compile/ASUSTEK CPU: i486DX (486-class CPU) Origin = "AuthenticAMD" Id = 0x4f4 real memory = 33554432 (32768K bytes) avail memory = 30654464 (29936K bytes) pcibus_setup(1): mode1res=0x80000000 (0x80000000), mode2res=0xff (0x0e) pcibus_setup(2): mode1res=0x80000000 (0x80000000) pcibus_check: device 0 1 2 3 4 5 is there (id=04961039) Probing for devices on PCI bus 0: configuration mode 1 allows 32 devices. chip0 <SiS 85c496> rev 49 on pci0:5 ncr0 <ncr 53c810 scsi> rev 17 int a irq 11 on pci0:12 mapreg[10] type=1 addr=0000e800 size=0100. mapreg[14] type=0 addr=fbff0000 size=0100. reg20: virtual=0xf4dda000 physical=0xfbff0000 size=0x100 ncr0: restart (scsi reset). ncr0 scanning for targets 0..6 (V2 pl23 95/09/07) ncr0 waiting for scsi devices to settle (ncr0:0:0): 200ns (5 Mb/sec) offset 7. (ncr0:0:0): "IBM WDS-3200 !J S550" type 0 fixed SCSI 2 sd0(ncr0:0:0): Direct-Access 206MB (422912 512 byte sectors) sd0(ncr0:0:0): with 2010 cyls, 4 heads, and an average 52 sectors/track (ncr0:1:0): "IBM MXT-540SL !N JA6I" type 0 fixed SCSI 2 sd1(ncr0:1:0): Direct-Access sd1(ncr0:1:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. 520MB (1065912 512 byte sectors) sd1(ncr0:1:0): with 2234 cyls, 7 heads, and an average 68 sectors/track (ncr0:2:0): "MICROP 1578-15 19U0" type 0 fixed SCSI 1 sd2(ncr0:2:0): Direct-Access 312MB (639450 512 byte sectors) sd2(ncr0:2:0): with 1224 cyls, 15 heads, and an average 34 sectors/track pci0: uses 256 bytes of memory from fbff0000 upto fbff00ff. pci0: uses 256 bytes of I/O space from e800 upto e8ff. Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 flags 0x1 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in fd1: 1.2MB 5.25in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <QUANTUM LPS270A> wd0: 258MB (528640 sectors), 944 cyls, 14 heads, 40 S/T, 512 B/S wdc0: unit 1 (wd1): <QUANTUM LPS540A> wd1: 516MB (1057280 sectors), 1120 cyls, 16 heads, 59 S/T, 512 B/S wdc1: disabled, not probed. aha0: disabled, not probed. wt0 at 0x338-0x339 irq 9 drq 3 on isa wt0: type <Wangtek> matcd - Matsushita (Panasonic) CD-ROM Driver by FDIV, Version 1(26) 18-Oct-95 matcdc0 at 0x230-0x233 on isa matcdc0 Host interface type 0 matcd0: [CR-5630.80] npx0 on motherboard npx0: INT 16 interface sb0 at 0x220 irq 5 drq 1 on isa sb0: <SoundBlaster 16 4.11> sbxvi0 at 0x0 drq 5 on isa sbxvo0: <SoundBlaster 16 4.11> sbmidi0 not found at 0x330 Device configuration finished. Considering FFS root f/s. Configuring root and swap devs. configure() finished. BIOS Geometries: 0:03ae0d28 0..942=943 cylinders, 0..13=14 heads, 1..40=40 sectors 1:03fe0f3b 0..1022=1023 cylinders, 0..15=16 heads, 1..59=59 sectors 2:03ff063b 0..1023=1024 cylinders, 0..6=7 heads, 1..59=59 sectors 3:02073f20 0..519=520 cylinders, 0..63=64 heads, 1..32=32 sectors 4:03ff0e22 0..1023=1024 cylinders, 0..14=15 heads, 1..34=34 sectors 0 accounted for wd0s1: type 0x6, start 40, end = 471519, size 471480 : OK wd0s2: type 0xa5, start 471520, end = 528639, size 57120 : OK sd1s1: type 0xa5, start 32, end = 1064959, size 1064928 : OK sd0s1: type 0xa5, start 52, end = 422863, size 422812 : OK sd2s1: type 0xa5, start 34, end = 409529, size 409496 : OK sd2s2: type 0x82, start 409530, end = 474809, size 65280 : OK sd2s3: type 0x83, start 474810, end = 639029, size 164220 : OK sd0s1: type 0xa5, start 52, end = 422863, size 422812 : OK sd2s1: type 0xa5, start 34, end = 409529, size 409496 : OK sd2s2: type 0x82, start 409530, end = 474809, size 65280 : OK sd2s3: type 0x83, start 474810, end = 639029, size 164220 : OK wd1s1: type 0x6, start 59, end = 941167, size 941109 : OK wd1s2: type 0xa5, start 941168, end = 1057279, size 116112 : OK -- Kari Jokiranta Email: Kari.Jokiranta@hut.fi