Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!news.ecn.uoknor.edu!feed1.news.erols.com!howland.erols.net!newsfeed.internetmci.com!news.bayarea.net!baygate.bayarea.net!thorpej From: thorpej@baygate.bayarea.net (Jason R. Thorpe) Newsgroups: comp.unix.bsd.netbsd.misc Subject: Re: NetBSD on Hp300 : installation problems. Date: 5 Nov 1996 22:58:47 GMT Organization: George's NetBSD answer man Lines: 18 Message-ID: <55ogr7$chm@news.bayarea.net> References: <32796CEC.6FAD9A81@lsi.supelec.fr> NNTP-Posting-Host: baygate.bayarea.net In article <32796CEC.6FAD9A81@lsi.supelec.fr>, Jean-Baptiste Nivoit <nivoit_jea@lsi.supelec.fr> wrote: > I want to install NetBSD-1.2, I can boot from the tape drive, which >gets me into sys_inst, but I don't know what number I have to give to the >disklabel command. Both disks are on HP-IB at 14, but I don't know their >slave number ( which I need to calculate the unit number disklabel >needs)...How do I get these ? If you look on the back of the drives, there will either be DIP switches or a dial used to select the HP-IB slave. This number will be from 0 to 7. If you have any more problems, you might want to post them to port-hp300@NetBSD.ORG. -- Jason R. Thorpe <thorpej@bayarea.net>