Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!news.ecn.uoknor.edu!feed1.news.erols.com!news.idt.net!enews.sgi.com!news.sgi.com!news.tamu.edu!news.utdallas.edu!nrchh45.rich.nt.com!bcarh189.bnr.ca!bmerhc5e.bnr.ca!bcarh8ab.bnr.ca!bquah82!rcisyk From: rcisyk@bnr.ca (Rostyslav Cisyk ) Newsgroups: comp.unix.bsd.freebsd.misc Subject: FreeBSD 2.1 + XFree86 problem Date: 27 Nov 1996 15:38:23 GMT Organization: Bell Northern Research Lines: 65 Message-ID: <57hn9f$sp4@bcarh8ab.bnr.ca> NNTP-Posting-Host: bquah82.bnr.ca Keywords: XFree86 3.2 X-Newsreader: TIN [version 1.2 PL1] Hi, I'm trying to get XFree86 v.3.2 to work with FreeBSD 2.1-RELEASE on my DX4-100. XFree86 v.3.1.2 used to work fine with my old S3Vision864, however I'd like to get v3.2 to work with my new Diamond Stealth64 Video 2MB VRAM (3240) graphics card. After configuring XFree86, the X server (XF86_S3) dies upon startup with the following error message. Does anybody happen to know why this is happening? Is it because I am running FreeBSD 2.1-RELEASE rather than 2.1.5? Thanks, Rosty. XFree86 Version 3.2 / X Window System (protocol Version 11, revision 0, vendor release 6100) Release Date: Oct 24 1996 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 2.1.5 Configured drivers: S3: accelerated server for S3 graphics adaptors (Patchlevel 0) newmmio, mmio_928, s3_generic Using syscons driver with X support (version 2.0) (using VT number 4) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings) (**) Mouse: type: MouseMan, device: /dev/cuaa0, baudrate: 1200, Chorded middle button (**) S3: Graphics device ID: "Diamond Stealth64 Video 3240/3400 (IBM RAMDAC)" (**) S3: Monitor ID: "MAG DX15F" (--) S3: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. (--) S3: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (--) S3: PCI: 968 rev 0, Linear FB @ 0x0c000000 (--) S3: card type: PCI (--) S3: chipset: 968 rev. 31 (--) S3: chipset driver: newmmio (--) S3: videoram: 2048k (**) S3: Ramdac type: ibm_rgb524 (**) S3: Ramdac speed: 220 (--) S3: Using hardware cursor from IBM RGB52x RAMDAC (**) S3: Using IBM RGB52x programmable clock (--) S3: with refclock 0.000 MHz (probed 4.706 & 5.294) (--) S3: Maximum allowed dot-clock: 220.000 MHz (**) S3: Mode "1024x768": mode clock = 85.000 (**) S3: Mode "800x600": mode clock = 50.000 (**) S3: Mode "640x480": mode clock = 31.500 (--) S3: Operating RAMDAC in pixel multiplex mode (--) S3: Using 8 bits per RGB value (--) S3: Virtual resolution set to 1024x768 Fatal server error: Caught signal 8. Server aborting X connection to :0.0 broken (explicit kill or server shutdown). Nov 26 23:30:22 eclipse /kernel: pid 396: XF86_S3: uid 0: exited on signal 6 --=====================_849080794==_--