Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!news.mel.connect.com.au!munnari.OZ.AU!spool.mu.edu!howland.erols.net!news-peer.gsl.net!news.gsl.net!news-paris.gsl.net!news.gsl.net!rain.fr!francenet.fr!itesec!frmug.fr.net!xp11.frmug.org!not-for-mail
From: Philippe Charnier <charnier@xp11.frmug.org>
Newsgroups: comp.unix.bsd.freebsd.misc
Subject: Re: FreeBSD 2.1 + XFree86 problem
Date: 1 Dec 1996 17:55:32 +0100
Organization: Ph. Charnier's InterNetNews site
Lines: 42
Message-ID: <xmkhgm65hmm.fsf@xp11.frmug.org>
References: <57hn9f$sp4@bcarh8ab.bnr.ca>
X-Newsreader: Gnus v5.3/Emacs 19.34
rcisyk@bnr.ca (Rostyslav Cisyk ) writes:
>
> Hi,
>
> I'm trying to get XFree86 v.3.2 to work with FreeBSD 2.1-RELEASE on my
> DX4-100. XFree86 v.3.1.2 used to work fine with my old S3Vision864, however
> I'd like to get v3.2 to work with my new Diamond Stealth64 Video 2MB VRAM
> (3240) graphics card.
>
> (--) S3: PCI: 968 rev 0, Linear FB @ 0x0c000000
I have (--) S3: PCI: 968 rev 0, Linear FB @ 0xf8000000
> (**) S3: Using IBM RGB52x programmable clock
(--) S3: Using IBM RGB52x programmable clock (MCLK 66.476 MHz)
> (--) S3: with refclock 0.000 MHz (probed 4.706 & 5.294)
(--) S3: with refclock 14.318 MHz (probed 14.386 & 14.289)
Section "Device"
Identifier "Diamond Stealth64 Video 3240/3400 (IBM RAMDAC)"
VendorName "Diamond Video"
BoardName "Unknown"
#VideoRam 2048
#Option "slow_vram"
DacSpeed 220
# Use Option "nolinear" if the server doesn't start up correctly
# (this avoids the linear framebuffer probe). If that fails try
# option "nomemaccess".
#
# Refer to /usr/X11R6/lib/doc/README.S3, and the XF86_S3 man page.
Ramdac "ibm_rgb526"
EndSection
Works fine for me running 3.0 current, and got XFree86-3.2 compiled from
sources.
--
------ ------
Philippe Charnier charnier@lirmm.fr (smtp)
charnier@xp11.frmug.org (uucp)
``a PC not running FreeBSD is like a venusian with no tentacles''
------------------------------------------------------------------------