Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!news.rmit.EDU.AU!news.unimelb.EDU.AU!munnari.OZ.AU!news.ecn.uoknor.edu!news.wildstar.net!newsfeed.direct.ca!portc01.blue.aol.com!cliffs.rs.itd.umich.edu!howland.erols.net!www.nntp.primenet.com!nntp.primenet.com!dispatch.news.demon.net!demon!richsoft.demon.co.uk!richsoft.demon.co.uk!steve From: Steve Richards <steve@richsoft.demon.co.uk> Newsgroups: comp.unix.bsd.freebsd.misc Subject: HELP! PPP new to unix networking1 Date: Sun, 29 Dec 1996 15:22:45 +0000 Organization: Arcturus Enterprises Lines: 70 Distribution: world Message-ID: <FpclwAAFzoxyIwCD@richsoft.demon.co.uk> NNTP-Posting-Host: richsoft.demon.co.uk X-NNTP-Posting-Host: richsoft.demon.co.uk MIME-Version: 1.0 X-Newsreader: Turnpike Version 3.01 <4lXF7BuDcBo6R4XSmiElJJbCzt> Xref: euryale.cc.adfa.oz.au comp.unix.bsd.freebsd.misc:33135 I hope someone can advise me whats going on - I feel that I have got ppp to run (configured system etc) it now runs i.e dials, logs on, goes into packet mode) but after that I can not get any net related command to work i.e telnet 158..... ping .... etc - I can talk to ppp via telnet localhost 3000 and it appears ok - Obviously I am missing a step in the config process but I can't find it. Am I correct in assuming that once I have issued ppp -auto demonisp then I should be able to use any of the regular supplied net commands? I enclose a bit of the ppp.log file with the as supplied debug level. thanks in advance 12-29 14:05:07 [305] Using interface: tun0 12-29 14:05:07 [306] Listening at 3000. 12-29 14:05:07 [306] PPP Started. dial OK! login OK! 12-29 14:05:46 [306] *Connected! 12-29 14:05:46 [306] LCP: state change Initial --> Closed 12-29 14:05:46 [306] LCP: state change Closed --> Stopped can't open /etc/ppp/ppp.secret. 12-29 14:07:58 [306] Disconnected! 12-29 14:07:58 [306] Connect time: 132 secs 12-29 14:07:58 [306] Phase: Dead 12-29 14:07:58 [306] LCP: LayerStart 12-29 14:07:58 [306] Phase: Establish 12-29 14:07:58 [306] LCP: state change Stopped --> Starting dial failed. 12-29 14:50:58 [306] Enter pause for redialing. 12-29 14:51:28 [306] Redialing timer expired. dial OK! login OK! 12-29 14:51:50 [306] *Connected! 12-29 14:51:50 [306] LCP: state change Initial --> Closed 12-29 14:51:50 [306] LCP: state change Closed --> Stopped can't open /etc/ppp/ppp.secret. 12-29 14:52:08 [306] LCP: state change Stopped --> Closed 12-29 14:52:14 [306] PPP Terminated. 12-29 14:52:40 [350] Using interface: tun0 12-29 14:52:40 [351] Listening at 3000. 12-29 14:52:40 [351] PPP Started. can't open /etc/ppp/ppp.secret. 12-29 14:54:10 [358] Using interface: tun0 12-29 14:54:10 [358] PPP Started. 12-29 14:54:35 [358] *Connected! 12-29 14:54:35 [358] LCP: state change Initial --> Closed 12-29 14:54:35 [358] LCP: state change Closed --> Stopped 12-29 14:55:21 [358] SIGTERM 12-29 14:55:21 [358] LCP: state change Stopped --> Closed 12-29 14:55:22 [358] PPP Terminated. 12-29 14:58:15 [367] Using interface: tun0 12-29 14:58:15 [368] Listening at 3000. 12-29 14:58:15 [368] PPP Started. dial OK! login OK! 12-29 14:58:43 [368] *Connected! 12-29 14:58:43 [368] LCP: state change Initial --> Closed 12-29 14:58:43 [368] LCP: state change Closed --> Stopped can't open /etc/ppp/ppp.secret. 12-29 14:59:34 [368] LCP: state change Stopped --> Closed 12-29 14:59:41 [368] PPP Terminated. 12-29 15:00:08 [374] Using interface: tun0 12-29 15:00:08 [374] PPP Started. magic is same!! 5f3a9184, 5f3a9184, 0 -- Steve Richards