Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!news.mel.connect.com.au!news.syd.connect.com.au!phaedrus.kralizec.net.au!news.mel.aone.net.au!grumpy.fl.net.au!news.webspan.net!ix.netcom.com!news From: "Rick Verhaalen" <rickver@jci.com> Newsgroups: comp.unix.bsd.freebsd.misc Subject: 2.1.5 doesn't see the 2940U and more Date: 9 Jan 1997 12:41:13 GMT Organization: Netcom Lines: 6 Message-ID: <01bbfe2a$6e910560$99a9bacd@#mp-lv> NNTP-Posting-Host: ytn-oh4-25.ix.netcom.com X-NETCOM-Date: Thu Jan 09 4:41:13 AM PST 1997 X-Newsreader: Microsoft Internet News 4.70.1155 Xref: euryale.cc.adfa.oz.au comp.unix.bsd.freebsd.misc:33681 On a Compaq Deskpro 6000 with a 2940U the ahc0 driver is never loaded and no PCI devices shown in the view mode of config. The 2.1.6 boot floppy will see the PCI bus but I would like to use the 2.1.5 CD. Also the CD on the secondary IDE port (irq 15, I/O 170 is not detected). Any ideas? I'm about ready to download 2.1.6 to my DOS partition and install from there.