*BSD News Article 86396


Return to BSD News archive

Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!news.ecn.uoknor.edu!news.wildstar.net!serv.hinet.net!news.uoregon.edu!hammer.uoregon.edu!arclight.uoregon.edu!news-feed.inet.tele.dk!sn.no!nntp.uio.no!in1.nntp.cais.net!pegasus.hermesnet.net!news
From: death@the-hermes.net (the Mad Monk)
Newsgroups: comp.sys.sun.hardware,comp.unix.bsd.netbsd.misc
Subject: Re: SUN3/50 Ethernet Problem
Date: Wed, 08 Jan 1997 03:22:01 GMT
Organization: Hermes Internet Service, Inc., Washington, DC
Lines: 32
Message-ID: <32d612ae.50144214@news.the-hermes.net>
References: <pd93ewgb0uh.fsf@planck.physik.uni-kassel.de> <pd9afqlevun.fsf@planck.physik.uni-kassel.de>
NNTP-Posting-Host: death.hermesnet.net
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Newsreader: Forte Agent .99g/32.339
Xref: euryale.cc.adfa.oz.au comp.sys.sun.hardware:42944 comp.unix.bsd.netbsd.misc:5102

just wait until the next poor bastard does a search on Deja News and
finds his answer before posting... then it will all be worth it! :)
_A

aheit@planck.physik.uni-kassel.de (Andreas Heitmann) wrote:

>>>>>> "I" == Andreas Heitmann <aheit@planck.physik.uni-kassel.de> writes:
>In article <pd93ewgb0uh.fsf@planck.physik.uni-kassel.de> aheit@planck.physik.uni-kassel.de (Andreas Heitmann) writes:
>
>    I> Hi, I have an old SUN3/50 with NetBSD 1.2 installed and I'm now
>    I> trying to set up a local network with a linux box. The machines
>    I> are connected with a standard ethernet cable (BNC). I'm using
>    I> the BNC connector at the SUN, not the AUI port. When trying to
>    I> configure the interface le0 on the SUN, NetBSD says that the
>    I> carrier is lost. I checked the cabling and it seems ok (length
>    I> is 30m, T-connectors with 50 ohm terminators at both ends). Am
>    I> I using the correct interface device?
>
>Thanks to all who answered the question. The solution is to switch the
>eight DIP switches on the motherboard near the ethernet chipset from
>OFF to ON. It works great now. BTW, this is also in the FAQ, I'm sorry
>for wasting bandwidth.
>
>Best Regards,
>-- 
>Andreas Heitmann                                     Phone: +49-561-804-4571  
>Universit"at Gesamthochschule Kassel                       Fax: +49-5624-709
>Arbeitsgruppe Theoretische Physik                        
>Heinrich-Plett-Str. 40                     EMail: aheit@physik.uni-kassel.de
>34132 Kassel                  Finger/Talk: aheit@slater.physik.uni-kassel.de
>Germany      http://www.physik.uni-kassel.de/physik/theorie/aheit/index.html