Return to BSD News archive
#! rnews 1774 bsd
Newsgroups: comp.unix.bsd.freebsd.misc
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!news.mel.connect.com.au!news.mel.aone.net.au!grumpy.fl.net.au!news.webspan.net!newsfeeds.sol.net!news-xfer.netaxs.com!news.mathworks.com!enews.sgi.com!ix.netcom.com!kbd
From: "Kirk Davis" <kbd@netcom.com>
Subject: ijppp 2.2-Beta problems
Message-ID: <01bc07d1$4ce58200$8016d480@toshiba>
Sender: kbd@netcom23.netcom.com
Organization: Netcom On-Line Services
X-Newsreader: Microsoft Internet News 4.70.1155
Date: Tue, 21 Jan 1997 19:29:32 GMT
Lines: 33
Xref: euryale.cc.adfa.oz.au comp.unix.bsd.freebsd.misc:34387
I'm experiencing some problems getting ijppp to work under
2.2-Beta and was hoping someone would have some
ideas:
Connecting ijppp to a netcom shell account via slirp. Can get
all the way to the 2 systems exchanging IP addresses. ijppp
appears to get these addresses correctly ("ifconfig tun0" shows
these set up right after connect).
But when I try to telnet to the remote system (e.g.
telnet 192.100.81.108), the command will just time-out with
no response from remote host.
netstat -i shows packets going out but none coming in. netstat -s
likewise shows ip/tcp packets going out, but no ip packets coming
in. "show protocol" from within ijppp shows quite a few packets from
everything but IP (IP = 0).
"show log" from with-in ijppp shows things connected ok but the connection
times out after 2 minutes and drops the connection ("show log" says
something
like "too many echo response failures").
Spent quite a bit of time going over the config scripts in /etc/ppp -
looked
at several examples and believe these to be correct.
Anyone have any ideas? Has any one had any trouble with 2.2-Beta and
ijppp?
Tnx,
Kirk Davis