Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!news.ecn.uoknor.edu!feed1.news.erols.com!cpk-news-hub1.bbnplanet.com!news.bbnplanet.com!news-peer.sprintlink.net!news.sprintlink.net!Sprint!howland.erols.net!news2.digex.net!news5.digex.net!haven.umd.edu!purdue!mozo.cc.purdue.edu!hopf.math.purdue.edu!wilker From: wilker@hopf.math.purdue.edu (Clarence Wilkerson) Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: Printing to JetDirect on network Date: 10 May 1997 13:34:29 GMT Organization: "Purdue University Department of Mathematics" Lines: 9 Message-ID: <5l1th5$1s@mozo.cc.purdue.edu> References: <01bc5c0b$e3dae360$64d91dce@phishhead.dawtech.com> <87wwp9e8e4.fsf@phaedrus.uchicago.edu> Reply-To: wilker@math.purdue.edu NNTP-Posting-Host: hopf.math.purdue.edu To: stephen farrell <stephen+usenet@farrell.org> Xref: euryale.cc.adfa.oz.au comp.unix.bsd.freebsd.misc:40687 Not all models of the TCPIP JetDirect have the buildin LPR mode. Often the older models for LJ II or III do not. Plus there are dedicated models out ther for NOVELL, 3Com, etc networks. Usually the difference is mainly the EPROM on the card. But I suspect the LPR models have more RAM also. Clarence Wilkerson