Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!news.mira.net.au!news.netspace.net.au!news.mel.connect.com.au!munnari.OZ.AU!news.ecn.uoknor.edu!feed1.news.erols.com!cpk-news-hub1.bbnplanet.com!news.bbnplanet.com!europa.clark.net!news.radio.cz!newscore.univie.ac.at!newsfeed.Austria.EU.net!cosy.sbg.ac.at!sbg.ac.at!03-newsfeed.univie.ac.at!fstgal00.tu-graz.ac.at!user From: Peter.Gstettner@campusart.com (Peter W. Gstettner) Newsgroups: comp.unix.bsd.netbsd.misc Subject: NetBSD Mac SE/30 Booting Problem Date: Thu, 15 May 1997 23:34:25 +0200 Organization: CampusART Lines: 34 Message-ID: <AFA14E0196681A779@180.176.225.170.193.in-addr.arpa> NNTP-Posting-Host: gimli.lorien.big.ac.at Xref: euryale.cc.adfa.oz.au comp.unix.bsd.netbsd.misc:5948 Hi! I'm new to NetBSD and therefore this might be a well-known problem: I just installed NetBSD mac68k 1.1 on a Macintosh SE/30 with 8MB RAM and a Micron Videocard which is not used (no monitor connected). When booting, the system switches to "text-mode" and says several things: ...hex dump... (lines starting with "Low =") get_mapping(): Too many NuBus ranges (???) ...hex dump... (lines starting with "Log =") no internal video at address 0 -- videoaddr is 0xfee08040 Done. Bootstrapping the pmap system. Failure in BSD boot. nextpa=0x106000, high[0]=0x100000. panic: You're hosed! Stopped at _Debugger+0x6: unlk a6 db> unexpected trap; vector offset 0x0 from 0x739c0000. ... then, the system freezes :-( any suggestions?? if so, please reply by mail! Thanks a lot in advance, Peter. BTW: any ideas, if a Dayna SCSI/Link 3 Ethernet adapter will work ;)