Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!news.ecn.uoknor.edu!feed1.news.erols.com!news-peer.sprintlink.net!news.sprintlink.net!Sprint!EU.net!newsfeed.Austria.EU.net!cosy.sbg.ac.at!sbg.ac.at!03-newsfeed.univie.ac.at!fstgal00.tu-graz.ac.at!user From: Peter.Gstettner@campusart.com (Peter W. Gstettner) Newsgroups: comp.unix.bsd.netbsd.misc Subject: Re: NetBSD Mac SE/30 Booting Problem Date: Fri, 16 May 1997 09:25:40 +0200 Organization: CampusART Lines: 46 Message-ID: <AFA1D89496681F27D@180.176.225.170.193.in-addr.arpa> References: <AFA14E0196681A779@180.176.225.170.193.in-addr.arpa> NNTP-Posting-Host: gimli.lorien.big.ac.at Xref: euryale.cc.adfa.oz.au comp.unix.bsd.netbsd.misc:5951 In article <AFA14E0196681A779@180.176.225.170.193.in-addr.arpa>, Peter.Gstettner@campusart.com (Peter W. Gstettner) wrote: > Hi! > > I'm new to NetBSD and therefore this might be a well-known problem: > > I just installed NetBSD mac68k 1.1 on a Macintosh SE/30 with 8MB RAM and a > Micron Videocard which is not used (no monitor connected). When booting, > the system switches to "text-mode" and says several things: > > ...hex dump... (lines starting with "Low =") > get_mapping(): Too many NuBus ranges (???) > ...hex dump... (lines starting with "Log =") > no internal video at address 0 -- videoaddr is 0xfee08040 > Done. > Bootstrapping the pmap system. > Failure in BSD boot. nextpa=0x106000, high[0]=0x100000. > panic: You're hosed! > > Stopped at _Debugger+0x6: unlk a6 > db> unexpected trap; vector offset 0x0 from 0x739c0000. > > ... then, the system freezes :-( > > any suggestions?? > > if so, please reply by mail! > > Thanks a lot in advance, > Peter. > > BTW: any ideas, if a Dayna SCSI/Link 3 Ethernet adapter will work ;) > Hi again, removed the Micron Video card -> WORKED! Thanks for your help! Peter.