Return to BSD News archive
Received: by minnie.vk1xwt.ampr.org with NNTP
id AA6073 ; Mon, 04 Jan 93 17:20:54 EST
Newsgroups: comp.unix.bsd
Path: sserve!manuel.anu.edu.au!munnari.oz.au!uunet!gatech!usenet.ins.cwru.edu!agate!tfs.com!tfs.com!julian
From: julian@tfs.com (Julian Elischer)
Subject: Re: questions of scsi tape driver.
Message-ID: <1993Jan6.193746.2479@tfs.com>
Organization: TRW Financial Systems
References: <1993Jan3.003448.2389@netcom.com>
Date: Wed, 6 Jan 1993 19:37:46 GMT
Lines: 40
In article <1993Jan3.003448.2389@netcom.com> shawr@netcom.com (rich shaw) writes:
>Recently I bought a used tandberg TDC3640 scsi tape drive. I think it's
>a QIC150 drive. This drive works fine under dos (I am using aspitar).
>But when I boot 386bsd with julian's scsi drivers(Thanks julian), there
>seem to be some problems recognize or initialize the drive. Below are
>the messages on the screen.
>
>dev4,lu0: tape1 (sequential), removable 'unknownunknown????' SCSI0
> st0: scsi tape drive:0 blocks of 512 bytes
wow a really old device... almost SASI not scsi!
>cmd fail
>cmd fail
>...
>
>After I compiled with scsi_debug set to 1, I got the following message.
>
>aha_scsi_cmd <ccb0(0x23) cmd fail
>aha_done ccb0(0x33)> ccb0(0x23)> ahaintr scsi error rval=3
>code from driver 0x2
unfortunatly I need more information..
the scsi_debug word has many bits, each of which specify different debugging:\
set it to -1 for more info..
thanks
>
>-- rich
>-- shawr@netcom.com
>
julian
+----------------------------------+ ______ _ __
| __--_|\ Julian Elischer | \ U \/ / On assignment
| / \ julian@tfs.com +------>x USA \ in a very strange
| ( OZ ) 2118 Milvia st. Berkeley CA. \___ ___ | country !
+- X_.---._/ USA+(510) 704-3137(wk) \_/ \\
v