Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!news.ecn.uoknor.edu!news.wildstar.net!news.sdsmt.edu!data.ramona.vix.com!sonysjc!su-news-hub1.bbnplanet.com!cpk-news-hub1.bbnplanet.com!news.bbnplanet.com!newsfeed.internetmci.com!gryphon.phoenix.net!brewich.brewich.com!bbs From: Donal <bbs@brewich.brewich.com> Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: Serial port baud rate greater than 19200bps ? Date: 26 May 1997 15:49:18 GMT Organization: The Brewers' Witch BBS-Largest Pagan BBS in Texas-(713)272-7350 Lines: 10 Message-ID: <5mcbdu$ba6$2@gryphon.phoenix.net> References: <01bc69ce$6ef28be0$250a40ca@akira> Reply-To: donal@bbs.brewich.com NNTP-Posting-Host: brewich.com X-Newsreader: TIN [UNIX 1.3 unoff BETA 970424; i386 FreeBSD 2.1.5-RELEASE] Xref: euryale.cc.adfa.oz.au comp.unix.bsd.freebsd.misc:41626 Jeffrey Yung <yung@hk.super.net> wrote: > I'm using COM3, irq 5 and a USR Spotster modem with FreeBSD 2.2.1. When I > set the baud rate of the serial port to 19200 or below. Everything work > fine. However, if I set it higher than 19200, garbage is resulted after > connected. Any suggestion? I had much the same problem, but only with v.32 and below. v.34 seems to handle 115200 just fine. on the v.32 I have to use 19200. What model of Sportster do you have?