Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!spool.mu.edu!howland.erols.net!news-peer.sprintlink.net!news-pull.sprintlink.net!news-in-east.sprintlink.net!news.sprintlink.net!Sprint!199.171.20.9!news.nkn.net!news.panther.net!nemesis!hammy!news-in.iadfw.net!news.gymnet.com!LSNT1!lsbsdi6.lightspeed.net!news.silcom.com!news.west.net!HSNX.wco.com!hub.org!news.radio.cz!europa.clark.net!cpk-news-hub1.bbnplanet.com!cam-news-hub1.bbnplanet.com!news.bbnplanet.com!news-fe ed1.tiac.net!news.thecia.net!not-for-mail From: Casper <casper@rage.hostile.net> Newsgroups: comp.unix.bsd.bsdi.misc Subject: Re: Virtual file systems (striping) on BSDI 3.0x86? Date: 26 May 1997 19:37:04 GMT Organization: I need to put my ORGANIZATION here. Lines: 45 Message-ID: <759C1866FD80461D.56B08C6492D4C08A.55D6CE19CC15FD24@library-proxy.airnews.net> X-Orig-Message-ID: <5mcop0$5vq$1@news.thecia.net> References: <sinkr.861999718@tempermental> <ph-ya023280002704971634050001@news3.his.com> <5ma425$ar$1@news.thecia.net> <EAr9o9.Bxw@spcuna.spc.edu> NNTP-Proxy-Relay: library.airnews.net NNTP-Posting-Host: biceps.gymnet.com X-Newsreader: TIN [UNIX 1.3 unoff BETA 970409; i486 Linux 2.0.30] Xref: euryale.cc.adfa.oz.au comp.unix.bsd.bsdi.misc:6919 Terry Kennedy <terry@spcuna.spc.edu> wrote: > matt <casper@rage.hostile.net> writes: > > sd0: sn 2108290: media error: unrecovered read error (41 retries) > > sd0: retry 0 > > sd0: sn 2108290: media error: unrecovered read error (41 retries) > > sd0: retry 0 > > sd0: sn 2108290: media error: unrecovered read error (41 retries) > > > It's the physical drive failing. You don't say anything about what brand/ > model your drive(s) are, or what enclosures you're using, so it's a bit hard > to give good advice. Here is the dmesg info on my drives bha0 at isa0 iobase 0x330 irq 11: BusLogic BT-946C rev 4.25J (32-bit) Delaying for SCSI bus reset and device self tests bha0: sync, parity tg0 at bha0 target 0: sync rate 10.00 MB/s, period 100 ns, offset 15, disconnect off sd0 at tg0 unit 0: disk: SEAGATE ST15230N rev 0298 (SCSI-2) 8386733*512 tg1 at bha0 target 1: sync rate 10.00 MB/s, period 100 ns, offset 15, disconnect off sd1 at tg1 unit 0: disk: SEAGATE ST15230N rev 0638 (SCSI-2) 8386733*512 tg2 at bha0 target 2: sync rate 10.00 MB/s, period 100 ns, offset 15, disconnect off sd2 at tg2 unit 0: disk: SEAGATE ST15230N rev 0638 (SCSI-2) 8386733*512 tg3 at bha0 target 3: sync rate 10.00 MB/s, period 100 ns, offset 15, disconnect off sd3 at tg3 unit 0: disk: SEAGATE ST15230N rev 0638 (SCSI-2) 8386733*512 tg4 at bha0 target 4: sync rate 10.00 MB/s, period 100 ns, offset 15, disconnect off sd4 at tg4 unit 0: disk: Quantum XP34300W rev L912 (SCSI-2) 8399520*512 All of the drives are inside the computer. I also have this message in my dmesg's bha0: warning, interrupts not working, using polling I have had two differnt drives on sd0 give me the same messages. The other drive is a Seagate ST19171WC 9Gig. -- ------------------------------------------------------ casper@hostile.net hostile networks ------------------------------------------------------