Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!news.cs.su.oz.au!metro!metro!munnari.OZ.AU!spool.mu.edu!howland.erols.net!newsfeed.internetmci.com!news.dti.ad.jp!news-jp-0.abone.net!np1.iij.ad.jp!wnoc-tyo-news!news.nc.u-tokyo.ac.jp!train.ad.jp!iroha.utsunomiya-u.ac.jp!nikko.utsunomiya-u.ac.jp!yokota From: yokota@zodiac.mech.utsunomiya-u.ac.jp. (Kazutaka YOKOTA) Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: 2.2.1, 486, and ATI mouse Date: 30 May 1997 04:57:59 GMT Organization: Utsunomiya University, Utsunomiya, Japan Lines: 23 Message-ID: <5mlmon$ksc$1@nikko.utsunomiya-u.ac.jp> References: <5mfoco$pkp$1@News.Dal.Ca> NNTP-Posting-Host: zodiac.mech.utsunomiya-u.ac.jp X-Newsreader: mnews [version 1.19PL2] 1996-01/26(Fri) Xref: euryale.cc.adfa.oz.au comp.unix.bsd.freebsd.misc:41880 In article <5mfoco$pkp$1@News.Dal.Ca> for comp.unix.bsd.freebsd.misc Derek A Cole wrote: coleda>>I have 2.2.1 installed on my 486 33, but the mouse an ATI mouse connected to a coleda>>ATI VGA Wonder XL video card. The mouse is set to irq 5 0x23c. I have a SB16 coleda>>also on irq5, but support for it is not install in the kernal, yet. I am going coleda>>to try removing the SB for now. coleda>> coleda>>The problem is the mouse will not work in XFree86. Xwindows comes ups, I can coleda>>change video modes with Ctrl-Alt-+ but the mouse does not work. coleda>> coleda>>HELP, support for mse0 is in the kernal, the config of the kernal is set to coleda>>irq5 port 0x23c, and no mouse. I can't even get the mouse to work in the coleda>>/stand/sysinstall XFree86 config program. The ATI card usually comes with a utility program to set up the card. You can enable/disable the mouse interface and set the port and IRQ number of the bus mouse port on the card with the utility program. I think you can set the port number to 23c or 238, and choose an IRQ number from 2, 3, 5 and 10. My ATI Graphics Ultra+ (ISA) offers that many. Kazu