Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!spool.mu.edu!howland.erols.net!ais.net!chippy.visi.com!visi.com!news-out.visi.com!not-for-mail From: Pat Jensen <patj@earth.fcoe.net> Newsgroups: comp.unix.bsd.bsdi.misc Subject: HP SureStore Tape Problem? Date: 04 Jun 1997 14:37:59 CDT Organization: (missing) Lines: 59 Sender: <none>@earth.fcoe.net Message-ID: <5n4g6n$1ga$1@darla.visi.com> NNTP-Posting-Host: earth.fcoe.net NNTP-Posting-Date: 04 Jun 1997 14:37:59 CDT X-Newsreader: TIN [UNIX 1.3 unoff BETA 970424; i386 BSD/OS 2.1] Xref: euryale.cc.adfa.oz.au comp.unix.bsd.bsdi.misc:6963 I'm having a problem getting my tape drive to work in BSD/OS. Here are the details: Adaptec 1502 ISA (no BIOS) - Detects just fine. HP SureStore 6400/2000 SCSI2 - Probes just fine. ----------------------------------------------------- dmesg ---- BSDI BSD/OS 2.1 Kernel #0: Fri Jan 12 15:01:30 MST 1996 polk@demiurge.BSDI.COM:/home/polk/sys.dist/compile/GENERIC cpu = Pentium (about 100 MHz) model 2, stepping 5 delay multiplier 2546 real mem = 41943040 avail mem = 39772160 buffer cache = 4030464 isa0 (root) pci0 at root: configuration mechanism 1 pccons0 at isa0 iobase 0x60 irq 1: color, 8 screens pcaux0 at isa0 iobase 0x60 irq 12 com0 at isa0 iobase 0x3f8 irq 4: buffered (16550AF) com1 at isa0 iobase 0x2f8 irq 3: buffered (16550AF) lp0 at isa0 iobase 0x378 irq 7 fdc0 at isa0 iobase 0x3f0 irq 6 drq 2: floppy controller fd0 at fdc0 slave 0: 1.44M HD 3.5 floppy wdc0 at isa0 iobase 0x1f0 irq 14: disk controller wd0 at wdc0 drive 0: sec/int=4 2503872*512 wd1 at wdc0 drive 1: sec/int=4 4124736*512 npx0 at isa0 iobase 0xf0: math coprocessor vga0 at isa0 iobase 0x3c0 maddr 0xa0000-0xaffff: VGA graphics sa0 at isa0 iobase 0x340 irq 11, initiator id 7 Delaying for SCSI bus reset and device self tests tg0 at sa0 target 1 st0 at tg0 unit 0: HP HP35470A rev 1009 (SCSI-2) DDS cassette tape we0 at isa0 iobase 0x300 irq 10 maddr 0xd0000-0xd3fff we0: SMC type 0x0 16bit address 00:20:c5:01:cc:4d pe0 at isa0/lp0: Pocket Ethernet-2 xir0 at isa0/lp0: Pocket Ethernet-3 changing root device to wd0a ------------------------------------------------------------------------ I toss a tape into the drive and try to dump 0uf /dev/nrst0 /home.. (or tar, or mt..) I get these errors whenever anything touches the tape: st0: not ready: not ready, init command required st0: not ready: not ready, init command required st0: not ready: not ready, init command required st0: not ready: not ready, init command required ------------------------------------------------------------------------- Anyone have any ideas? Please e-mail.. Much Thanks, Pat