*BSD News Article 97349


Return to BSD News archive

Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!news.uwa.edu.au!disco.iinet.net.au!news.mel.aone.net.au!news.mira.net.au!vic.news.telstra.net!act.news.telstra.net!news.telstra.net!psgrain!ru.uni.net.za!quagga.ru.ac.za!hermes.is.co.za!hammer.uoregon.edu!csulb.edu!gatech!news-out.communique.net!communique!news-spur1.maxwell.syr.edu!news.maxwell.syr.edu!news-xfer.cybernet.dk!news.onramp.net!news-in.iadfw.net!news.gymnet.com!LSNT1!lsbsdi6.lightspeed.net!news-ana-7.sprintlink.net!ne
ws-ana-24.sprintlink.net!news-west.sprintlink.net!news-peer.sprintlink.net!news.sprintlink.net!Sprint!newsfeed.internetmci.com!mr.net!news.netins.net!geoffrey
From: geoffrey@netins.net (geoffrey alexander)
Newsgroups: comp.unix.bsd.freebsd.misc
Subject: Re: unknown class root in 2.2.2-RELEASE
Date: Thu, 29 May 1997 15:25:54 -0500
Organization: The alt.movies.kubrick Newsgroup
Lines: 36
Message-ID: <D10FDACA1FEF308B.DE1EEF1ABEBADBE3.BD9D42300B722A37@library-proxy.airnews.net>
X-Orig-Message-ID: <geoffrey-ya023380002905971525540001@news.netins.net>
References: <5mgh3o$j2m$1@soggy.eis.net.au>
NNTP-Proxy-Relay: library.airnews.net
NNTP-Posting-Host: biceps.gymnet.com
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit
X-Newsreader: Yet Another NewsWatcher 2.3.3
Xref: euryale.cc.adfa.oz.au comp.unix.bsd.freebsd.misc:42585

In article <5mgh3o$j2m$1@soggy.eis.net.au>, ernie@eis.net.au (Ernie Elu) wrote:

> I am getting the following message on the console every time I login or ftp
> to a newly installed 2.2.2-RELEASE machine.
> 
> inetd[150]: login_getclass: unknown class 'root'
> 
> I used cvsup to upgrade to 2.2-STABLE but I still get the same error message
> 
> The system is using DES encryption on passwords, everything else is
> standard.
> 
> Any suggestions?

The problem seems to be that there is no default login.conf file provided
with the release -- although it's omission isn't damaging, the man page
(sec 5) is dense enough I haven't attempted to create one myself from
scratch (and I have enough things to configure) so I get the same error on
the console, even though I did a clean install on a newly partitioned disk.
The facilities that this new capability-file allows look interesting though
-- I'd like to see a more basic 'how-to' documentation somewhere.

I should mention this is the ONLY problem I've had with this release. It's
gorgeous, and well worth the time.


Geoffrey Alexander                    
__________________________________________________________

If you can talk brilliantly enough about a problem, it can
create the consoling illusion that it has been mastered...
                                           Stanley Kubrick
__________________________________________________________

The Kubrick Site  @  http://www.netins.net/showcase/sahaja