Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!news.mira.net.au!news.netspace.net.au!news.mel.connect.com.au!munnari.OZ.AU!news.Hawaii.Edu!news.caldera.com!enews.sgi.com!nntprelay.mathworks.com!howland.erols.net!news-peer.sprintlink.net!news-sea-19.sprintlink.net!news-in-west.sprintlink.net!news.sprintlink.net!Sprint!199.232.56.18!news.ultranet.com!news.netlink.com!tsg From: tsg@stout.netlink.com () Newsgroups: comp.unix.bsd.freebsd.misc Subject: FreeBSD 2.2.2 and 3C589D PCMCIA Ethernet Card Date: 24 Jun 1997 20:59:12 GMT Organization: CSI Netlink, Inc. Lines: 17 Message-ID: <5opcf0$1h9$1@news> NNTP-Posting-Host: stout X-Newsreader: slrn (0.9.2.1 BETA UNIX) Xref: euryale.cc.adfa.oz.au comp.unix.bsd.freebsd.misc:43448 Hi. I hope someone has some suggestions. I'm unable to install 2.2.2 using the PCMCIA card above. I configure it and at bootup it says: zp: found card in slot 0 zp0 not found at 0x300 I used the 3COM DOS utility to check the settings and I'm using IO 0x300 and interrupt 10 (the ram addr is 0 and is not settable which bothers me). The card works fine under Win95. If this card is not supported under FreeBSD can anyone recommend another PCMCIA Ethernet card that is? Thanks! Todd