Return to BSD News archive
Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!uunet!in1.uu.net!204.147.226.2!quack!quack.kfu.com!nsayer From: nsayer@quack.kfu.com (Nick Sayer) Newsgroups: comp.unix.bsd.freebsd.misc Subject: Re: FreeBSD 2.2.2 and 3C589D PCMCIA Ethernet Card Date: 27 Jun 1997 04:07:23 GMT Organization: The Duck Pond public unix - http://www.kfu.com/ Lines: 27 Message-ID: <5ove9r$81n$1@phoenix.kfu.com> References: <5opcf0$1h9$1@news> NNTP-Posting-Host: quack.kfu.com X-Newsreader: NN version 6.5.1 (NOV) Xref: euryale.cc.adfa.oz.au comp.unix.bsd.freebsd.misc:43602 tsg@stout.netlink.com () writes: >Hi. I hope someone has some suggestions. >I'm unable to install 2.2.2 using the PCMCIA card above. I configure it >and at bootup it says: > zp: found card in slot 0 > zp0 not found at 0x300 >I used the 3COM DOS utility to check the settings and I'm using IO 0x300 >and interrupt 10 (the ram addr is 0 and is not settable which bothers me). >The card works fine under Win95. >If this card is not supported under FreeBSD can anyone recommend another >PCMCIA Ethernet card that is? Run, don't walk, to www.jp.freebsd.org/PAO. The PAO package improves the support for PCcard and APM systems in FreeBSD. Instead of using the (lame) z? drivers, you use pccardd to hook up the ep or ed drivers (or a variety of other drivers, such as sio, wdc, aic, spc...) to the cards as you insert and remove them. -- Nick Sayer http://www.kfu.com/~nsayer/ | nsayer [at] quack [dot] kfu [dot] com | Tha average California Lottery UNSOLICITED BULK EMAIL IS UNACCEPTABLE | ticket costs $1 and returns 50¢. AND WILL BE CONSIDERED AS HARASSMENT |