Return to BSD News archive
Received: by minnie.vk1xwt.ampr.org with NNTP id AA6698 ; Tue, 12 Jan 93 08:08:16 EST Path: sserve!manuel.anu.edu.au!munnari.oz.au!spool.mu.edu!umn.edu!csus.edu!netcom.com!netcomsv!telco-nac.com!telco-nac.com!not-for-mail From: dave@telco-nac.com (David Cornejo) Newsgroups: comp.unix.bsd Subject: [386bsd] Need help with multiport driver Date: 14 Jan 1993 11:56:38 -0800 Organization: Telco Systems NAC, Fremont, CA Lines: 22 Distribution: world Message-ID: <1j4ghmINNqv@homer.telco-nac.com> NNTP-Posting-Host: homer.telco-nac.com Keywords: com-multiport Has anyone using cgd's com-multiport driver used it with a Kouwell KW-531A? When I compile my kernel with COM_MULTIPORT defined cu/tip'ing to these ports causes a hang. If I comment out the top two ports and compile without COM_MULTIPORT the two remaining ports work fine. My board is configured for the default DOS configuration, i.e. two ports are at the standard COM1 & COM2 addresses and interrupts and the other two are at non-standard I/O addresses (I forget them right now) and share INT 3. The documentation with the driver mentions this board, but gives no details. Any help or suggestions would be most appreciated. (BTW Despite my ineptitude in setting up the config, my serial ports work much nicer, thanks Chris!) -- Dave Cornejo, Telco Systems NAC voice 510.490.3111 4305 Cushing Parkway ext 5158 Fremont, CA 94538 FAX 510.490.9396