Return to BSD News archive
#! rnews 1811 bsd Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!news.cs.su.oz.au!inferno.mpx.com.au!news.ci.com.au!brian.telstra.net!news.telstra.net!nsw.news.telstra.net!news.syd.connect.com.au!phaedrus.kralizec.net.au!news.mel.aone.net.au!news.mira.net.au!pumpkin.pangea.ca!news-spur1.maxwell.syr.edu!news.maxwell.syr.edu!news-peer.sprintlink.net!news-pull.sprintlink.net!news-in-east.sprintlink.net!news.sprintlink.net!Sprint!199.45.255.100!coop.net!earp.oneimage.com!not-for-mail From: ken <kenzen@oneimage.com> Newsgroups: comp.unix.bsd.freebsd.misc Subject: IC-CARD Date: Tue, 08 Jul 1997 09:42:53 -0600 Organization: Imagenet, Inc Lines: 17 Message-ID: <33C25FFD.88895548@oneimage.com> NNTP-Posting-Host: kesey.oneimage.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Mailer: Mozilla 4.01 [en] (Win95; I) X-Priority: 3 (Normal) Xref: euryale.cc.adfa.oz.au comp.unix.bsd.freebsd.misc:44110 I have a peculiar problem , I installed freebsd on my laptop , a toshiba 435cds. I did an ftp install, im on a network with a t1 connection to the net. I booted using boot-pao.flp and it found and mounted the PCMCIA ethernet card no problem. I did the ftp install which went off without a hitch. when i rebooted however no ethernet connection. it didnt see the card. I have since done the following a: loaded and compiled the PC card kernel. b: configured and compiled a custom kernel c: tried numerous i/o irq settings the closest i got was when i did the custom kernel, it mounted ed at the PC card, but then right below it says ed0 was not found on 0xXXX (fill in the blanks) I was wondering if there is anyone out there who can help me with this , I have searched high and low for someone. Email me at kenzen@oneimage.com , please thanks ken