*BSD News Article 99949


Return to BSD News archive

Path: euryale.cc.adfa.oz.au!newshost.carno.net.au!harbinger.cc.monash.edu.au!munnari.OZ.AU!uunet!in1.uu.net!128.230.129.112!news-spur1.maxwell.syr.edu!news.maxwell.syr.edu!ais.net!su-news-hub1.bbnplanet.com!news.bbnplanet.com!venus.sun.com!uk-usenet.uk.sun.com!usenet
From: Casper.Dik@Holland.Sun.COM (Casper H.S. Dik - Network Security Engineer)
Newsgroups: comp.sys.sun.admin,comp.unix.admin,comp.unix.bsd.netbsd.misc
Subject: Re: Sparc/NetBSD: Switching to serial console when you *really* have to!
Supersedes: <cancel.casper.869315965@uk-usenet.uk.sun.com>
Date: 19 Jul 1997 12:34:10 GMT
Organization: Sun Microsystems, Netherlands
Lines: 15
Message-ID: <casper.869315965@uk-usenet.uk.sun.com>
References: <rreiner.869242843@nexus.yorku.ca>
NNTP-Posting-Host: room101.holland.sun.com
Xref: euryale.cc.adfa.oz.au comp.sys.sun.admin:90158 comp.unix.admin:60696 comp.unix.bsd.netbsd.misc:6282

rreiner@nexus.yorku.ca (Richard Reiner) writes:

>Problem: how to switch sparc 1+ to serial console (with any reasonable
>but *known* serial port parameters) -- without seeing what I'm doing.

Eitehr boot it and set the eeprom paramters over teh net or simply
unplug the keyboard, that shoudl work too (or perhaps unplug kbd & remove
framebuffer)

Casper
--
Expressed in this posting are my opinions.  They are in no way related
to opinions held by my employer, Sun Microsystems.
Statements on Sun products included here are not gospel and may
be fiction rather than truth.